 |
| Wolftech Lift Components Bulgaria |
AC SERIES GENERAL SPECIFICATIONS
- CE certified as control board and control panel
- CAN-bus based shaft and group communication system
- Gets floor information from counter, monostable counter,gray code, encoder and inverter encoder outputs.
- Machine room temperature monitoring circuit
- Real time clock and date
- 250 detailed (state, time, date) fault memory
- Built-in 3-phase and thermistor monitoring circuit
- Turkish, English, German and Greek menu language options
- Computer connection over USB, network and Internet
- Supports simple push button, simple collective, up and down collective traffic systems
- Designed for hydraulic lifts
- Parallel, car serial and full serial
shaft communication - Supports up to 16 floors
- Releveling and pre-opening door
support by integrated door
bridging circuit - Designed for electric lifts
- Parallel, car serial and full serial
shaft communication - Supports up to 32 floors
- Designed for electric lifts
- Full serial shaft communication
- Supports up to 64 floors.
- Software for geared machine in conformity with lift standard
- Management of the coil of the speed regulator to control
unintented car motion. - Continous checking of brake feedback contacts in gearless
machine according to annex A3 - Getting the position of the car in 1mm accuracy by using
encoder.
- Valve driving function in conformity with hydraulic lift standard
- Special built-in software for GMV-A3, Bucher DSV and BLAIN
L10 valves. - Periodically valve test function
- Periodic valve test according to count of starts or test date.
- Getting the positing of the car in 1mm accuracy by using
encoder.
IN CONFORMITY WITH EN 81-72/73
- Integrated software in conformity with EN 81 – 72 firefighter lift
standard - Integrated software in conformity with EN 81 – 73 behaviour of
lifts in the event of fire standard. - Alternative fire floor support with 2 independent fire floor inputs
(FIRE)
- 55 different programmable functions from 29 inputs
- 90 different programmable functions from 34 outputs
- Programmed input/output function transfer support to free
input/output in case of any damage in input/output
- Simplex, duplex, triplex… up to 8 lifts
group operation support - Automatic manager assignment in
case of any error in manager lift of
group - Duty transfer in case of any error in a
member of group
- Lifts with different number of stops can
work in a group by adjusting missing
floor above and missing floor belowparameters.
SHAFT INFORMATION BY ENCODER
- Floor selector system with encoder or
simulation encoder outputs of inverter - Automatic shaft learning
- Adjustable parameter for accurate floor level
detection - 1 mm precision car position information
- Complies the requirements about floor level
accuracy listed in EN81-1:A3 and EN81-2:A3
- Automatic start-up speed selection and speed
dependent target selection. - No medium speed required. Directly switching
from any travel speed to creeping speed. - Automatic minimum distance assignment for
speed selection. - Supports short floor application
- In short floor application, shortest floor distance
can be as short as door open zone - Effective method especially for high speed lifts
- Lift remote monitoring via computer
- Parameters adjustment and save to a
file support - Access to detailed error list and save
to a file support
- Remote connection support via local area
or internet over Ethernet - Directly connection over USB
Call or send an SMS about the details of the
fault the in case of an error/alarm
Lift access control via serial communication units by integrated
access control software
Floor or time dependent call acceptance system
2 different adjustable period selection
Maximum security with 32 bit (4.294.967.296) ID
PRIORITY CALL SYSTEM
Priority call system via serial communication units by using
access control units (RFID and I-Button)
Priority call system with keys
Priority call register to VIP floors with 3 different VIP inputs
No-waiting for authorized persons
Integrated user password to prevent
parameter access from unauthorized
persons
Prevent remote access and remote
control from unauthorized user via
computer
Start counter saved into memory
Passing to maintenance mode automatically depends on
adjustable start counter limit
Passing to maintenance mode automatically depends on
adjustable maintenance time
Only UPS or UPS + Battery based
rescue system in case of power failure
Integrated rescue function software
In addition to standard waitman key,
only hall calls which are confirmed
from cabin by waitman are
registered from control panel.
Releveling function in hydraulic and VVVF systems.
Up to 1 mm accuracy in relevelling with encoder.
Preopening doors.
Next direction assignment at floor level
Arrow parameter that selects arrow
output function as a motion arrow or
next direction arrow
Temporary inhibition of a button
when it is held pressed.
Automatically commissioning after
passing inspection mode to normal
mode.
Adjustable minimum/maximum working
temperature parameters
External thermostat input (THR)
Integrated software that holds
cabin door open during period of
loading button parameter.
Independent from door open
button or photocell
Landing door stays locked until cabin
door is completely open when the car is
at floor level (Only for semi-automatic
(manual) landing door and full automatic
cabin door system)
Only one door is open depends on
call side
Doors will open or not at floor level
according to doors parameter
settings
Independent door open-door close
buttons and photocell inputs
DSB
Takes lift to out of service. Lift does not serve to call registers,
however releveling system continues to function
DIK
Check of landing door open or not by lift door key
DPM
Lift stops at floor level where it can and
pass out of service mode with open doors
