Волфтех Лифт Компонентс
Основана през 1988 г., Bulut Makina и до днес продължава своето производство с най-новите технологии. От 1990г. до момента е официален дистрибутор на испанските автоматични врати- Fermatоr, а от 2000г. и на италианските хидравлични задвижвания - GMV. От 2010г. е официален дистрибутор на италианските асансьорни задвижвания-Sikor, а през 2013г. започва дистрибуцията на италианските асансьорни релси Marazzi, в качеството си на единствен оторизиран дистрибутор в страната (Турция). Bulut Makina е една от водещите компании в сектора, както в производството на цели асансьори, така и в производството и дистрибуцията на всякакви резервни части и възли. Bulut Makina гарантира качеството и надеждността на продуктите си, работейки с изключително квалифициран инженерен екип, който доставя решения за индивидуалните проекти на клиентите си, както и използването на висококачествени материали в производството. Wolftech Lift Components e упълномощен представител на Bulut Makina и Aybey Electronik и единствен дистрибутор на територията на България, както и за доставки до целия Балкански регион.

Folding Doors -бус врати (new technology)

AC SERIES LIFT CONTROLLER SYSTEMS

        

Wolftech Lift Components Bulgaria

www.wolftech.bg         info@wolftech.bg                +359 88 443 2174

                  AC SERIES GENERAL SPECIFICATIONS

• CE certified as control board and control panel
• CAN-bus based shaft and group communication system
• Gets floor information from counter, monostable counter,gray code, encoder and inverter  encoder outputs.
• Machine room temperature monitoring circuit
• Real time clock and date
• 250 detailed (state, time, date) fault memory
• Built-in 3-phase and thermistor monitoring circuit
• Turkish, English, German and Greek menu language options
• Computer connection over USB, network and Internet
• Supports simple push button, simple collective, up and down collective traffic systems
• Designed for hydraulic lifts
• Parallel, car serial and full serial 
  

  shaft communication
• Supports up to 16 floors
• Releveling and pre-opening door 
  

  support by integrated door 

  
  

  bridging circuit
• Designed for electric lifts
• Parallel, car serial and full serial 
  

  shaft communication
• Supports up to 32 floors
• Designed for electric lifts
• Full serial shaft communication
• Supports up to 64 floors.

                       IN CONFORMITY WITH EN 81-1+A3

• Software for geared machine in conformity with lift standard
• Management of the coil of the speed regulator to control 
  

  unintented car motion.
• Continous checking of brake feedback contacts in gearless 
  

  machine according to annex A3
• Getting the position of the car in 1mm accuracy by using 
  

  encoder.

                                  IN CONFORMITY WITH EN 81-2+A3

• Valve driving function in conformity with hydraulic lift standard
• Special built-in software for GMV-A3, Bucher DSV and BLAIN 
  

  L10 valves.
• Periodically valve test function
• Periodic valve test according to count of starts or test date.
• Getting the positing of the car in 1mm accuracy by using 
  

  encoder.

                                  IN CONFORMITY WITH EN 81-72/73

• Integrated software in conformity with EN 81 – 72 firefighter lift 
  

  standard
• Integrated software in conformity with EN 81 – 73 behaviour of 
  

  lifts in the event of fire    standard.
• Alternative fire floor support with 2 independent fire floor inputs 
  

  (FIRE)

                      PROGRAMMABLE INPUTS/OUTPUTS

• 55 different programmable functions from 29 inputs
• 90 different programmable functions from 34 outputs
• Programmed input/output function transfer support to free 
  

  input/output in case of any damage in input/output

                      GROUP LIFT

• Simplex, duplex, triplex… up to 8 lifts 
  

  group operation support
• Automatic manager assignment in 
  

  case of any error in manager lift of 

  
  

  group
• Duty transfer in case of any error in a 
  

  member of group

                      DIFFERENT FLOORS IN GROUP

    

• Lifts with different number of stops can 
  

  work in a group by adjusting missing 

  
  

  floor above and missing floor below 

  parameters.

                      SHAFT INFORMATION BY ENCODER

• Floor selector system with encoder or 
  

  simulation encoder outputs of inverter
• Automatic shaft learning
• Adjustable parameter for accurate floor level 
  

  detection
• 1 mm precision car position information
• Complies the requirements about floor level 
  

  accuracy listed in EN81-1:A3 and EN81-2:A3

                       DISTANCE BASED MOTION

• Automatic start-up speed selection and speed 
  

  dependent target selection.
• No medium speed required. Directly switching 
  

  from any travel speed to creeping speed.
• Automatic minimum distance assignment for 
  

  speed selection.
• Supports short floor application
• In short floor application, shortest floor distance 
  

  can be as short as door open zone
• Effective method especially for high speed lifts

                        COMPUTER CONNECTION

• Lift remote monitoring via computer
• Parameters adjustment and save to a 
  

  file support
• Access to detailed error list and save 
  

  to a file support

                        INTERNET / LAN CONNECTION

• Remote connection support via local area 
  

  or internet over Ethernet
• Directly connection over USB

                        GSM CONNECTION

• 
  

  Call or send an SMS about the details of the 
  

  fault the in case of an error/alarm

                        ACCESS SECURITY SYSTEM

• 
  

  Lift access control via serial communication units by integrated 
  

  access control software
• 
  

  Floor or time dependent call acceptance system
• 
  

  
  

   2 different adjustable period selection
• 
  

  Maximum security with 32 bit (4.294.967.296) ID

                         

PRIORITY CALL SYSTEM

• 
  

  Priority call system via serial communication units by using 
  

  
  

  access control units (RFID and I-Button)
• 
  

  Priority call system with keys
• 
  

  Priority call register to VIP floors with 3 different VIP inputs
• 
  

  No-waiting for authorized persons

                          PASSWORD PROTECTION

• 
  

  Integrated user password to prevent 
  

  
  

  parameter access from unauthorized 

  
  

  
  
  

  persons
• 
  

  Prevent remote access and remote 
  

  
  

  control from unauthorized user via 

  
  

  
  
  

  computer

              START COUNTER and MAINTENANCE TIME

• 
  

  Start counter saved into memory
• 
  

  Passing to maintenance mode automatically depends on 
  

  
  

  adjustable start counter limit
• 
  

  Passing to maintenance mode automatically depends on 
  

  
  

  adjustable maintenance time

                           RESCUE FUNCTION

• 
  

  Only UPS or UPS + Battery based 
  

  
  

  rescue system in case of power failure
• 
  

  Integrated rescue function software

                           EXTRA WAITMAN FUNCTION

• 
  

  In addition to standard waitman key, 
  

  
  

  only hall calls which are confirmed 

  
  

  
  
  

  from cabin by waitman are 

  
  

  registered from control panel.

                            LEVELING

• 
  

  Releveling function in hydraulic and VVVF systems.
• 
  

  Up to 1 mm accuracy in relevelling with encoder.
• 
  

  Preopening doors.

                           NEXT DIRECTION ARROWS

• 
  

  Next direction assignment at floor level
• 
  

  Arrow parameter that selects arrow 
  

  
  

  output function as a motion arrow or 

  
  

  
  
  

  next direction arrow

                           BUTTON FAULT CONTROL

• 
  

  Temporary inhibition of a button 
  

  
  

  when it is held pressed.
• 
  

  Automatically commissioning after 
  

  
  

  passing inspection mode to normal 

  
  

  
  
  

  mode.

          MACHINE ROOM TEMPERATURE MONITORING

• 
  

  Adjustable minimum/maximum working 
  

  
  

  temperature parameters
• 
  

  External thermostat input (THR)

                            LOADING BUTTON

• 
  

  Integrated software that holds 
  

  
  

  cabin door open during period of 

  
  

  
  
  

  loading button  parameter.
• 
  

  Independent from door open 
  

  
  

  button or photocell

                            CAM DELAY PERIOD

• 
  

  Landing door stays locked until cabin 
  

  
  

  door is completely open when the car is 

  
  

  
  
  

  at floor level (Only for semi-automatic 

  
  

  (manual) landing door and full automatic 

  
  

  cabin door system)

                            TWO DOORS SUPPORT

• 
  

  Only one door is open depends on 
  

  
  

  call side
• 
  

  Doors will open or not at floor level 
  

  
  

  according to doors parameter 

  
  

  
  
  

  settings
• 
  

  Independent door open-door close 
  

  
  

  buttons and photocell inputs

                             SPECIAL INPUTS

• 
  

  DSB 
  

  
  

  Takes lift to out of service. Lift does not serve to call registers, 

  
  

  
  
  

  however releveling  system continues to function
• 
  

  DIK 
  

  
  

  Check of landing door open or not by lift door key
• 
  

  DPM 
  

  
  

  Lift stops at floor level where it can and 

  
  

  
  
  

  pass out of service mode with open doors

 

      

  

Wolftech Lift Components ( PACKAGE ELEVATOR)

             Wolftech Lift Components Website

Wolftech Lift Components offers its customers a wide range of complete package lift solutions.Our engineering team is always ready to develop solutions for special projects of the costumers. 

The most important factors our business partners should consider as making their choice for pack lift are which purpose they will use the elevator and the condition of the building that elevator will be mounted. If the choice is correct, the elevator will work at its highest performance and gives sufficient productivity for their purposes. Our purpose is to raise our business partner’s satisfaction one more by offering the solution-oriented and economical elevators.

-MR (Machine Room) Elevator Complete Package
-MRL (Machine-Roomless) Elevator Complete Package
-Hydraulic Elevator Complete Package
-Service Elevator Complete Package
-Passenger Elevator Complete Package
-Freight Lift
-Hospital Elevator
-Panoramic Elevator Complete Package

**Do not forget! Every elevator project is a very important reference for us and our business partners.

Stair Lifts Platrforms

Wolftech Lift Components YouTube



  It is the most common access solution for both public and private buildings. Disabled Lifts provide fully independent access to the users as they simply press the button on the lift to control it and go up and down the stairs without needing anyone’s help. Wheelchair users, seniors and those who have difficulties in walking benefit from independent access through the disabled lifts.

ACCESS CONTROL SYSTEMS

Acces Control Systems For Lift 

ACCESS CONTROL SYSTEMS

Access control systems are used in lifts in order to prevent unautorized persons to use the lift. The devices can be installed in car or landing panels.

• It is access control system based on RFID card.
• It allows accessing/making a call to the system any defined  card is approached to internal detector.
• By means of optional external keypad module, new card of  can be defined or defined cards can be erase to/from system.
• It is also possible to use Master card to define new cards to system.

Lift And Spare Parts Sales

                                           ABOUT US

   Wolftech Lift Components is a elevator equipment company based in Bulgaria, distributors of Bulut Makina and Aybey Elektronik. Design of complete lift, shaft organization and part drawings are done by qualified engineering staff. Our engineering team is always ready to develop solutions for special projects of the costumers. 

   Wolf Tech supplies all types of lift components from reliable manufacturers. It is the Turkish distributor of Fermator automatic doors from Spain, GMV hydraulic units and SICOR traction machines form Italy.

Here are the best selling products; MB and Fermator automatic doors for lifts, GMV hydraulic, Sicor machine, A-E lift  inverter, Marazzi quide rails, Akis machine.In addition to all this, we are able to provide a great variety of compenents from one up to thousands.

                Wolftech Lift Components Website

A-E Lift Motor Driver

A-E Lift Motor Driver

• AE-Lift is a lift motor driver frequency inverter.
• It uses space vector control, has the ability of high floor level sensitivity and high comfort.
• Main controller DSP calculates all required calculations so fast than any microcontrollers.
• Standard terminal and functions for lift operations are predefined for control inputs and outputs.
• Brake coil and contactors are driven directly by device.
• Error output, reset input and output for early door open functions are standard in AE-Lift motor driver
• All terminals are pluggable and placed out of the box. No need to open device box for any connection.

                                                             A-E Lift Website

интерком монтаж и природа

                                                                       ELEVATOR COMMUNICATION MODULE 

Elevator communication module is used in emergency cases of elevators to communicate with the Door-keeper or Security Guard and call for help. It is activated with a simple touch and makes a call with CALLER ID. AHM02 is mounted inside the command panel of the elevator and is powered by the voltage taken from the elevator circuit.

интерком монтаж и природа

Stair Lifts And Platforms

     It is the most common access solution for both public and private buildings. Disabled Lifts provide fully independent access to the users as they simply press the button on the lift to control it and go up and down the stairs without needing anyone’s help. Wheelchair users, seniors and those who have difficulties in walking benefit from independent access through the disabled lifts.

- Different type of lifts can be applied to the buildings depending on the physical structure of the various stair types.
- We offer a wide range of access solutions for both public and private use. Feel free to contact us for further information regarding our high quality lifts that will help you overcome your architectural barriers.

Lift Types for Disabled Access

* Stair Lifts and Platforms
* Chair Lifts
* Vertical Lifts

STAIR LIFTS and PLATFORMS
- Suitable for both indoor and outdoor use.
- Applicable for all types of stairs. (Straight / Curved)
- The platform travels on the rail that is installed along the stairs.
- Takes minimum space when not in use with its foldable platform.
- Respecting aesthetics, always fits to the general view of the area.
- High quality and extremely safe.
- Optional foldable seat available which offers accessibility not only for wheelchair users but also elderly and individuals with limited physical capabilities.
- 2 years warranty

CHAIR LIFTS
- Applicable for both straight and curved stairs, it is the cost effective option to stair platform lifts.Since the user sits on lift’s own chair, it is ideal mostly for seniors and those having difficulties climbing stairs.
- Can be used either in or outdoor. Mostly preferred in private houses and villas , not in public buildings
- The user controls it via joystick.
- It’s elegant design fits perfectly to the decoration of houses.
- High quality and extremely safe.
- 2 years warranty

VERTICAL LIFTS
- Vertical lifts offer freedom of movement to the users and remove the barriers. Requiring no pits it can be easily applied to anywhere both in and outdoor spaces. Vertical lifts are also ideal for tight spaces. Customizable options available, therefore it is the affordable and total access solution.
- Allows the travel up to 7,5 mt height.
- Color and finish options available for customizable applications.
- Maximum comfort, maximum safety
- Providing fully independent access to the users, it is the best solution esp for public areas.
- It can be installed etiher in the stairwell ( in case of enough space ) or next to the stairs.

http://www.wolftech.bg/